Gozney

Gozney Dome Gen 2 Essentials: Choosing the Right Burner Guard, Stand Pegs, and Flue Extension

Gozney Dome Gen 2 Essentials: Choosing the Right Burner Guard, Stand Pegs, and Flue Extension

By Gozney | Published: 2026-07-19

Category: Buying Guides

Learn how to choose the right burner guard, stand wing accessory pegs, and flue extension for your Gozney Dome Gen 2. Practical advice for safer, more versatile outdoor cooking.

The Gozney Dome Gen 2 is a versatile outdoor oven, but a few well-chosen accessories can make it even more practical and enjoyable. Whether you want to protect the burner from wind and debris, add extra stability for larger cooks, or improve airflow for smoke control, knowing which add-ons genuinely help is key.

In this guide, we’ll walk through three essential upgrades: the burner guard, the stand wing accessory pegs, and the flue extension. We’ll cover what each does, when you’ll appreciate having it, and the trade-offs to consider before buying. No fluff—just honest advice to help you get the most from your Dome Gen 2.

Dome Gen 2 Burner Guard: Protection Without Sacrificing Performance

A burner guard sits over the gas burner opening on your Dome Gen 2, shielding it from strong wind, falling debris, and curious pets or children. If you cook outdoors in breezy conditions, a guard can prevent flame instability or unexpected shutdowns. It also adds a layer of safety by reducing direct access to the burner area.

That said, a burner guard is not essential for every setup. If your oven is in a sheltered patio or you only cook in calm weather, you may not notice a difference. Some guards also slightly reduce airflow, which can affect flame appearance—though not cooking performance. Look for a guard designed specifically for the Dome Gen 2 to ensure a proper fit and easy installation.

  • Tip: Install the burner guard before lighting the oven for the first time—it’s easier than retrofitting later.

Dome Gen 2 Stand Wing Accessory Pegs: Extra Stability for Heavy Loads

The stand wing accessory pegs attach to the sides of the Dome Gen 2 stand, providing a wider footprint and additional support. This is especially useful if you place heavy items like a large cast iron pan or a full baking steel on the side shelf, or if you frequently move the oven across uneven ground.

The trade-off is that the pegs add a few inches to the stand’s width, which may be an issue if your storage space is tight. They also require a few minutes to install. For most home cooks, the added stability is worth the minor footprint increase, especially if you cook for groups or use heavy cookware.

  • Tip: Pair the pegs with a Dome Flue Cap to keep rain and debris out when the oven is not in use.
  • Dome Flue Cap
    Dome Flue Cap

Dome Flue Extension: Better Smoke Control and Draft Performance

Dome Flue Extension
Dome Flue Extension

A Dome Flue Extension raises the chimney outlet above the oven dome, improving draft and directing smoke away from the cooking area. This is particularly helpful if you use your Dome Gen 2 in a covered porch, near a wall, or on a windy day. The extra height can also reduce smoke drifting into your face when you open the door.

However, a flue extension adds height to the oven, which may make it harder to fit under a low shelter or store in a compact space. It also adds a small amount of weight. For most outdoor setups, the improvement in smoke management is noticeable and worth the trade-off. Just ensure your stand and oven placement can accommodate the extra height.

  • Tip: If you use a flue extension, check that your oven cover still fits properly—some covers may need a slight adjustment.

Putting It All Together: Choosing the Right Dome Gen 2 Essentials

When selecting accessories for your Dome Gen 2, start with your actual cooking environment. If you cook in exposed, windy conditions, a burner guard and flue extension are practical upgrades that improve reliability and comfort. If you often load the side shelf with heavy pans or cook on uneven ground, the stand wing accessory pegs provide real stability benefits.

It’s easy to get carried away with add-ons, but the best approach is to buy only what solves a specific challenge you’ve encountered. A burner guard, flue extension, and stand pegs are three of the most functional Dome Gen 2 essentials—they address common wind, smoke, and stability issues without overcomplicating your setup.

  • Tip: Buy all three at once if you know your cooking environment requires them—it saves on shipping and ensures compatibility.

Choosing the right burner guard, stand wing accessory pegs, and flue extension for your Dome Gen 2 comes down to your specific cooking conditions. These accessories solve real problems like wind, smoke, and stability without adding unnecessary complexity. Focus on what you actually need, and your Gozney Dome will be even more enjoyable to use.

Shop Related Products

Dome Cover

Dome Cover

$39.99 $79.99

Shop Now
Arc Lite + Tonester

Arc Lite + Tonester

$200.00 $399.99

Shop Now
Tread + Tonester

Tread + Tonester

$250.00 $499.99

Shop Now
Dome XL (Gen 2) + Tonester

Dome XL (Gen 2) + Tonester

$1400.00 $2799.99

Shop Now